Shopping Cart
(Your shopping cart is empty)

Shop Johnnie's Favorites

Info






Granite Gold for Grranite and Stone

I am excited about this year, 2019….I feel like it’s going to be a wonderful year and a new beginning. Do you make resolutions and promise yourself that this will be the year that you will take care of projects around the house before they are a catastrophe? I know, I do too! I don’t want you to get discouraged about doing projects, so we are going to start small and by the end of the year...you will have earned “The Happy Handy Man” badge of honor.

Taking care of granite is not rocket science like they make you think. It’s simple as long as you have the right products. Granite Gold is a family business of stone care installers and restoration, and I can’t think of anyone better than that to know about granite. They have a three- step process that includes daily cleaning, sealing, and polishing. If your granite is newly installed, I promise your installation will NOT include sealing the granite. So seal it yourself with Granite Gold Sealer. Spray a three-foot area and wipe into the stone with a lint-free cloth. Buff dry with a lint-free cloth. I would repeat the process two more times. Granite Gold Sealer is food safe, non- toxic, non-acidic and biodegradable. Sealing will create a barrier to protect your stone against staining, etching and soil build up. I would suggest sealing at least once a year.

If you have older granite that does not shine like it used to, Granite Gold makes a polish that enhances shine and luster. Spray Granite Gold Polish onto stone surfaces and then buff with a paper towel or lint-free cloth. Ten wipe dry with another paper towel. You can use this polish on granite, marble and all other natural stone and quartz surfaces.

And it’s as simple as that! Remember everything is easy if you know how to do it and you have the right product. And that’s my job. Your job is to follow through, and one other thing…..share your knowledge with your neighbor. Happy New Year!!


Now to the email…..


Question: Trudy I have a fiberglass door that faces west, and it has faded and looks dull. Is there a quick fix that I could do that would perk it up for a while?
Answer: If it’s just faded and dull then you can use SunShield on the door. SunShield is made for wood doors, but it does wonders for fiberglass doors too. Start with a clean door. Then apply a quarter-sized amount of SunShield on a soft rag and start polishing the door. After the door is dry, you can apply a second coat.
If your fiberglass door has lost all of its color, you can apply a cost of Old Masters Gel Stain in the color of the original stain. Remember very thin coats. Call me if this is your project …I will walk you through it.


Question: I want to give my granddaughter her mother’s childhood rocking chair. The finish looks ok, but some of the rungs and armrests are loose. I know I will have to take it apart, sand and then apply wood glue and clamp it back together. Do you have any suggestions to make this project go easier?
Answer: Use a product called Chair Lok, or Wonder Lokem….it’s the same product. Chair Lok is powerful glue that has 4000psi of holding power. You don’t have to take your rocker apart. This glue will come with a dropper that you attach to the glue bottle nozzle. Then apply a few drops in the areas where the rocker is loose. Do not over apply. You will not need to clamp the loose joint. It might take you five minutes. Does this sound easier?


Question: I just had the worst luck when I removed some light bulbs outside. They were so stuck that they broke before I could remove them. I finally was able to get them out completely. Should I put something around the bases so that they don’t get so stuck?
Answer: This is an easy fix; apply Di-Electric Grease on the bulb base before installing the bulb. It will not dry out, and the bulb will be easier to remove next time. Great question!